The purpose of the injection sleeve is to deliver corrosive chemicals (moderately corrosive) into the pipe without damaging the pipe wall or the port at the injection site. Chemical injection that allows disinfectants to enter the pipe surface, thus preventing the chemical from leaking through the pipe wall. The barrel and receiver are made of chemical-resistant alloy or plastic (Kynar, 316 SS, Hastelloy C-276 or PVC). All injection cannula units from K-TECH Industrial are equipped with a spring-loaded key-release check valve to prevent injection from flowing into the main water when the system is closed. In the past, syringes were nothing more than a tube connected to a pipe. This design is susceptible to corrosion and cavitation in pipelines due to vortex shedding and other hazards. Additionally, the casings and pipes below are often not properly inspected. Because of this, a lot of pipe damage occurred behind the casings. K-TECH Fluid Control Chemical Injection Sleeve has an attractive shape that reduces the effects of vortex shedding, thus reducing the likelihood of failure due to erosion, corrosion, cavitation and sleeve breakage. Each sleeve is specifically designed for a specific application and complies with ASME standards, considering the pipe's vortex shedding, erosion, vibration, resonance and durability requirements. The housing can be equipped with one or two main valves. Fixed Injection Quill Manufacturer and Exporters in Oman. Retractable Injection Quill Exporters in Dubai.